Steve and Sherry

Colorado Springs Real Estate

Posts Tagged ‘construction and housing’

Windows Are The Eyes Of The House

If you want to install new windows, many factors play a role in determining which windows are the right ones. There are many types of windows. So-called wooden windows, Passive House windows, aluminum windows and PVC windows, plastic windows which are colloquially called. Wood is the oldest material in the window, which is still used by many window companies. Wood is a natural material which will not only be produced. The advantages of wooden windows is that this stable, durable, environmentally friendly and have a wide range of color, shape and size. Of course there are drawbacks.

In comparison to other window materials is subject to fluctuations in wood quality. This wooden windows have a long life, the framework should periodically be painted and glazed in larger intervals in order to protect them from wind and weather. Another type of windows are so-called plastic window. Currently used for the production of polyvinyl chloride, PVC shortly. PVC is a plastic, which is under warp and can handle heat. Thus it can be shaped easily, different types of profiles are possible.

The advantages of plastic windows are that these stable, durable, high quality and is virtually maintenance free. They are also very environmentally conscious, since they are recyclable. Furthermore, there is a wide color, shape and size spectrum. A high level of quality are the windows to clean and last a lifetime. The modern plastic windows are impervious to the weather, exhaust, lighting and cleaning. It can of course also be some disadvantages. For larger temperature fluctuations, it can happen that one must adjust the window, they open themselves may not be clean or close.

Solar Energy for New Home Construction

It warms up so with each pass a little more. In a conventional boiler, the temperature rises, however ad hoc. The ratio of the energy that is spent on this technology, and energy, obtained in this way shows the efficiency of the system. The installed heating systems come in many homes here to a value of 1:1, ie they need as much energy as they produce. In a well, used with the geothermal is, the ratio is much better 1:5.

The pump requires a kilowatt hour of electricity. On balance, however, there are five kilowatts of heat energy. Taking into account the higher cost is not for a modern heat-exchange system, so the saving is 80 percent. As little effective way of. The so-called flat probes have been established. They deprive the soil too quickly, the energy since being introduced in only two meters deep. The probes are located horizontally, spread over a fairly large area, which has also proved to be disadvantageous. Better and more effective working depth probes. After they let in by a deep hole in the ground transport, they were on the carrier liquid far more energy to the surface.

They also work faster. When the temperature of the groundwater wells 80-10 Celsius is utilized. These two wells must be drilled on the property. With a warm groundwater is pumped up to here in a heat exchanger give energy to. The other fountain is the outflow of cold water. To ensure that heats the ground again, the wells may not be installed side by side. Solar Comes to the deep geothermal energy from below, the solar thermal uses the sun, which provides free year-round energy. To catch them, solar panels are needed. They can be mounted on the roof in the south or oriented toward the sun at ground level in order to produce heat from solar energy. We included the warmth of a, which is continuously pumped through the collectors. They will submit to the heating or hot water system of the house. The purchase of these systems is currently still quite expensive. If you are not convinced, visit Robert J. Shiller. They pay off only if the collectors are optimally aligned and can get as much energy. In addition, a factor that one can not affect itself, the number of sunshine hours. The best is the utilization of course during the summer when the sun shines most of the time. And just this season, the energy is needed only a little. In winter it is advisable to operate the plant for solar thermal bivalent. Photovoltaic Solar photovoltaic uses the sun’s rays do not help to gain heat, but to produce electricity. Here, too, collectors are used, but working on a different principle. The electricity that is generated by the panels can consume in the home and, if more is produced than needed to be fed into the grid. For every kilowatt-hours, which is fed to the network, the operators receive money from the state.

Natural Slate In Your Own Home

Chronology and tips for laying a slate floor with an example in a new apartment in the the procedures described here can be viewed by interested client with the author of the article. Origin: Brazil, a source may send mail to the editors like to be asked is because not related to natural slate in every hardware store around the corner, we chose a vendor in the Hunsruck. Here is traditionally expected of high expertise, as the Hunsruck Slate is one of the most important regions. Natural slate is indeed only rarely in this region, the quality of almost entirely imported material but should be evaluated by experts. Kenneth R. Feinberg describes an additional similar source. How well the product actually shows itself only when it is delivered – the choice is, therefore, to a large part of trust. Preparation: The soil should be turned, it can use a tile adhesive, tile adhesive “would be good. The binding to the plate is sufficient. The processing is similar to the bonding of conventional tiles.

A primer was not performed. Are small differences in height acceptable, it is sufficient to glue with 10 mm notched trowel. Basically, it has been shown that a pre-sorting should be done carefully to material thickness. Also facilitated a pre-structure the subsequent laying. Here commercial tile crosses were used with 4 mm – wider gaps facilitate the settlement of differences in height. In this particular example, the relatively wide joints as well as up to 1.5 cm thick bed of adhesive was used to move around various wires.