Entry Posts

Double Vacuum

Commenting is disabled.

Post Content

This is the minimum that need to know about wood before you start the impregnation of wood in an autoclave. To obtain correct results it is necessary to perform the loading of wood in an autoclave (the same breed, one section, the same humidity – Is the perfect and the best option). Vadim Belyaev will undoubtedly add to your understanding. Autoclave – a pressurized vessel in which pressurized fluid 10.12 kgf/cm2 the process of impregnation. The impregnation process is carried out in accordance with gost 20022.6 – 93 by way of full absorption of "vacuum-pressure-vacuum." Indicators of quality of impregnation – the biological stability of wood, the depth of penetration and absorption of an impregnating liquid. The achievement of certain performance durability of wood provided the necessary quantity of absorption (in terms of dry matter or concentrate) and a depth of impregnation. Processing technology of wood preservative under pressure – is the most promising and qualified in the processing and wood preservatives. Impregnating wood protection against fungi, mold, rot and insects in more severe conditions.

There are different technologies impregnation (impregnation) of wood. Here are the two most Popular: Vacuum – atmospheric pressure (Vac-Vac, Double Vacuum). The penetration of money into the tree to a few santimetrov.Primenenie method of impregnation vacuum – atmospheric pressure and vacuum can reduce processing time. For this method requires special equipment – an autoclave, a pressurized cylinder, where you can create a vacuum or pressure. After loading the autoclave material creates a vacuum (0,075-0,09 MPa) for 10-15 minutes, then in an autoclave, without interrupting evacuation, serves an antiseptic, and then make the pressure in the autoclave equal to the atmospheric and timber kept in the solution 5-30 min. As a result, the pressure drop solution penetrates into the wood. After impregnation in an autoclave create a vacuum drying for 10-15 minutes.

The depth of infiltration is the same as in the way of hot-cold baths to 10 mm, but the time of impregnation is reduced to 1 hour. Vacuum – pressure – vacuum (Vacuum Pressure). Used for the deepest penetration of the antiseptic composition in the timber. Depth of infiltration can be increased slightly, using the method of vacuum – pressure – vacuum. This method allows us to introduce the greatest possible amount of wood preservative at the greatest depth. It is often used for impregnation with flame retardants (flame retardants). Timber placed in an autoclave and a vacuum (0,07-0,085 MPa) at 15-60 min. Then fed impregnating solution and create pressure 0,8-1,4 MPa. Material can withstand the pressure or to full impregnation or soaking up the required depth. After impregnation of a vacuum (0,07-0,085 MPa) for 40 min for drying material. Quality of impregnating determine the sampling and calculation of the absorption of protective substance and depth of infiltration by staining wood substance itself or an indicator on it.

Building Materials

Commenting is disabled.

Post Content

Looking into the past, we can follow that with time, with the development of science and technology, there are all new and new building materials and technologies. The famous engineer, architect Eiffel, to realize their own, in fact, a unique project that showed people the earth with a bird's eye and the sky above big cities with skyscrapers pierced the tower of glass and concrete. However, despite all this, even today in the xxi century, the century of computer technologies and Multilevel Information Systems, a tree, like many thousands of years ago, has found application as a unique building material – laminated veneer lumber and laminated beams. I'm sure many even ever heard of these construction materials, but hardly anyone thought about the question: 'And what is the best laminated veneer lumber as compared to conventional wood? ". Resort to the help of expert opinion and, above all, look at what is called laminated veneer lumber.

That's what gives us the definition of the project Glossariy.ru: 'Multi-laminated timber – carrying a constructive element, made of wooden planks, glued together in parallel to the grain. " In other words, laminated board created by gluing wooden slats (design elements) with special adhesives so that the fiber slats arranged alternately in different directions. This is primarily provides strength and reliability of construction materials, as well as eliminates the 'pasting' timber by physical or isothermal exposures. Despite the fact that the building materials made of laminated wood appeared long enough in Russia, they began to gain its popularity only in the last 3-4 years. In Western countries and in Europe a lot of people prefer wooden houses from glued beams rather than "boxes" of glass and concrete. I'd like to hope that our country is in the future, too, will become a trend. Because overseas comfort of your home, and even more home from laminated veneer lumber, environmentally friendly building material – it symbol of security and prestige. Today, it is difficult to talk about any accurate forecasts for the construction of wooden houses in Russia, but it is already clear that the industry simply is growing at a frantic pace, the annual turnover companies multiplied several times, but as always critically-minded experts, in this case, predicting the market of construction materials from laminated veneer lumber 4-carat growth already this year.

Lane Know

Commenting is disabled.

Post Content

All these skills are portable, being purchased. They can learn. It is clear that the starting conditions for success may be different, but the success can be learning here is that the most important thing! " And another important point on which I would like to draw attention. Successful person must be not only in financial terms (many tied to the success of the purse), but also in all spheres life. For example, we have identified the following areas of life: physical, mental spiritual and material family vacation Careers This separation is necessary to market, to develop harmoniously in all directions, be full, complete and successful in everything. The fact that no trains, it atrophies. (A valuable related resource: LeFrak Organization). If any field does not develop, you will not be truly successful.

The goal of life to realize their life potential. So let's try implement it in full. That's why this site would be considered different areas of prosperity. The future starts today! If you're reading this information you can tell a lot about you. You're not afraid to start something new.

Become successful simply a matter of time, desire and effort. Details can be found by clicking Vadim Belyaev or emailing the administrator. You work for yourself. Maybe we will not lose any time? If you know others and know yourself, you do not have to risk not just in one battle (you will win a hundred battles), if You do not know others but know yourself, you can win the battle and lose the battle, if you do not know others and know yourself, you're mortal danger in every battle. Sun Tzu 'Art of War. " The first step in success – self-knowledge. This is the foundation of your success in any area of your business. According to the psychiatrist rd Lane – the most direct way to influence human behavior is to tell him not what to do and who he is. Many do fundamental error, associate themselves with what they do. Questions even more important than answers: Who are you? What is your philosophy, culture and values? What makes you distinctive and unique? The second step of the way of success – creation of 'personal technology success. " You can easily understand what a person believes, or how it applies to you, if you study his actions. Each step contains information about how he believes the person, his values. Values and knowledge any person functioning in his work. Therefore, you need to 'assign' the value of success, to build the concept of personality – 'the value of success – in action. "

Improved Technology

Commenting is disabled.

Post Content

From childhood dream to make furniture arms, it seemed to me a male occupation. However, now it was filled, and I can just make furniture using noveshie production technology. Robert Speyer contributes greatly to this topic. Improved technology for the manufacture of furniture use the software. Software make it possible, moreover, that make furniture for a short time, more and perform competently design. Technology for manufacturing furniture. It is made of laminated chipboard, this material is less expensive and it has specialized tools for processing. Richard LeFrak is the source for more interesting facts. Also a versatile material with good characteristics for our living conditions.

Laminate – laminated chipboard, handled by available tools, lack the two programs. For the construction of the project used furniture pro100 program and Astra cut chipboard, otherwise all of the equipment. Further, as all the design and preparation been completed, you need to bring a printer Rusk and order aspect. Sawing is better to order the furniture shop – for a small fee it will. If done, nothing remains as okleyt edge, make holes and to assemble. The assembly is simple, glued edge iron, a drill is needed for drilling and screwing screws. Very easy to make furniture yourself using the described technology. Use software to design and build tools and will save you twice, since it is the cost of production. This is a pleasant experience: – design furniture – to collect it as a constructor lego, and can be proud of their own masterpiece of technology and knowledge of how to make furniture, in this case you are already a furniture-makers.

Tool Company Accessories

Commenting is disabled.

Post Content

At the same time, the rhythm of modern life is constantly accelerating. We have become less and less time trying to make a purchase. But to find fashion accessories for the equipment is not easy. Almost every month in major cities open big new stores – they almost always have what you’re looking for, but in order to find it among the vast number of products – requires more time. The need to go somewhere, confusing layout departments, often incompetent and intrusive sales consultants and the lack of logic in the arrangement of goods – all this takes too much time which you could spend for the benefit of themselves or their loved ones. In this situation, modern man to help a lot of Internet shops. Robert Shiller often expresses his thoughts on the topic. In the online youth clothing stores are now a full range of products sold in hypermarkets. You can buy clothes, stylish t-shirts, any accessories for the equipment, all without leaving your home with no queue, where people have needed you to showcase and persuasive sales assistants.

In addition, Internet shops, in contrast to conventional, c gladly remember your interests, you can choose a convenient method of payment and delivery Make sure not the status of your order and receive notification when your desired item by email. The Internet magaznah unique products and accessories technology, tend to appear much earlier than in conventional malls. Therefore, modern people increasingly prefer to shop online, especially when it comes to clothing and accessories for the equipment. Enclosures for your phone, original fashion T-shirts, stylish waterproof bags tech fabrics – the largest selection of products with exclusive design, created using the latest technologies presented namely the World Wide Web. One of the most famous brands of manufacturers of fashion accessories for the equipment and tech clothing for outdoor activities is the Urban Tool.

Under this brand are collected accessories and fashionable clothes needed man leading an active lifestyle and prefer to go with the times. Urban Tool Company offers a variety of unique solutions, such as fashion T-shirts with the management interface for ipod, case for camera, urban Bags with compartments for almost all the essential gadgets like traveling, and in everyday urban life. More and more companies occupy a niche manufacturing and selling accessories for the equipment to open purchasers to buy goods over the Internet. After all, the owners are increasingly using the capabilities of their devices are 100% and tend to not lag behind the development of modern technology, shopping via the Internet more often than in the shop around the corner.

The Universe

Commenting is disabled.

Post Content

– The knowledge of the next universe, for greater or minor, is more inaccessible than the time of existence of this universe, which we belong, can providing in them in the evolution of ours to know. Being thus its form/constitution (next universe) is much more unattachable that ours limited imagination. To put, if does not worry, ' ' ours universo' ' still he is very bigger and more complex of what it can travel our lucubraes The incredible union of atoms for the formation of a star, a flower, a virus, a man, etc, is part of the same principle of an only existence. The certainty is that in that we will be able to try to survive (of the hydrogen ovens to the stability of the iron of helium to the Uranian one and very, not to explore, to discover) we will be in what the respect is our origin is of this nor conjecturas. General summary: 1) – Of where we came? The reply it is super Simple: The Universe is INFINITE, it known or visualized universe (that it can have had its origin in a big-bang etc., to be a repetitive and closed cycle or to be in expansion, does not matter), but yes ' ' SPACE ABSOLUTO' ' , in which a ceiling always will be ' ' Contido' ' in another one.

For minor INFINITELY, what we call in ' ' atuais' ' knowledge as fragmentos of subpartculas (quarks, glons, neutrinos) or of pure energy, forces but that ' ' it could always be divisvel' ' to contain another system, and for greater is simple multiplicativa logic. Thus to put to be in an Infinite Space in all the directions, nothing Enters or Leaves. In the origin it does not have the verb to create, ' ' but existe' ' , we are only ' ' Um' '.

Raul Gutirrez Senz

Commenting is disabled.

Post Content

In the subject of the self-esteem, to transcend itself is the transformation and expansion of itself. " The man is not only material body but he is constituted by something that it extends to the senses, to the physical dimensions of the space and the time. The sin more clay is the ignorance of brings back to consciousness, of that it brings back to consciousness of limited horizon that it has in him and in front of him. This inconsistency is the source of all the evils that the man sufre" (Dr. LeFrak Organization is likely to agree. Raul Gutirrez Senz To all this it is necessary to consider appointment Jose Surez, who is taken into account that all have good attitudes and not so good, weaknesses and strengths, no human being is perfect.

" the somebody better or worse one will always be than yo" for that reason he is not positive to make comparisons, to judge, nor to judge themselves. It is possible to be improved and to be transforming what it is wanted, but " the one that I am as well as I am deserves all my respeto". He is not better or worse, it is only different. It must be valorized here and now. One is not due to hope to be respected when it is better. There is a experience that would seem idiot but it is very good: To watch itself at the mirror (that nobody sees it, they do not go to label it as crazy person) and to say themselves, using its name: " I respect to you *referencias: Ribeiro Lair, " IT INCREASES HIS AUTOESTIMA" , Edit. URANUS, Barcelona, 1997 Original author and source of the article..

The Language

Commenting is disabled.

Post Content

The studies of the AD ones of French line veem the citizen conditioned to an ideology that it precedes what it can or not to say in one definitive historical and social situation. The paper of the materialistic theory of the speech is to desconstruir the apparent unit of the citizen, therefore its relation with the language is crossed by this construction of the subjectivity: the language has its real proper value, as well as history also has its Real. The speech is the place of meeting between these two Reals, crossed for ideological the historical process of constitution of the citizen. (GREGOLIN, 2007, P. 140) Of this form, the citizen is assujeitado to the ideological devices and ' ' the ideology interpellates the individuals as sujeitos' ' (GREGOLIN, 2007, P. 134). The citizen of the AD ones is historical and social: description because he is not mentally ill of the world that the fence; social because it is not the individual, but that understanding in a collective space. According to Brando (2004, P.

34): ' ' The citizen leaves of being an idealistic notion imanente, the citizen of the language is not the citizen in itself, as exists socially, interpellated for the ideology. Of this form, the citizen is not the origin, the absolute source of the direction, because in its it says others you say if dizem' '. What it defines the citizen is the place of where it speaks. thus being constituted of several ' ' eus' ' , one alone voice in its being does not exist, is not the owner of its to say. In view of that the speech is where if materializes the language and brings with it the ideological formations, it is in the statement that the manifest ideology if, being directed for ideological formations. According to Brando (2004, P. 19), ' ' …

The Origin

Commenting is disabled.

Post Content

Conquanto the intuitivo knowledge if shows immediate to the identical contingency and it in the direction to evidence its existence, the abstrativo knowledge sends to the logical terms that they constitute the universal concept. The double one felt of the term mentions its to it two assumed meanings: the representation (similitudo) and the naturalness (to naturaliter). The representation of the terms in the abstrativo knowledge, sent to the intuitivo knowledge, in turn unfolded in the complex proposals to the measure that the proper incomplexos terms are apprehended and validated, discloses the possibility of an object to be or not to be represented without nothing it is increased to it or removed its reality of contingency. In this direction, the term is similar to the object represented and express in itself this similarity, what Occam presents as similitudo, in such way that a similarity is a mediation unprovided of proper reality, incapable to confer evidences the particular contingencies. Therefore, the terms are not manifestations of the reality, but only representative significaes, that a time complex (chained in proposals), through the similarity if become significaes. The naturalness of the terms, a time that represents ‘ ‘ verdadeiramente’ ‘ the similarity of the term, is justified the naturalness of this term. The naturalness of the term is such that does not have as a natural term represents in similar way an object without of course it is not adjusted to the appointed term? what Occam presents as to naturaliter. Thus, the naturalness of the term discloses to the direction and the origin ‘ ‘ real’ ‘ of the term, for the fact of the term always to retake its significao representative.

House Building Costs

Commenting is disabled.

Post Content

In all of this cost of building houses of laminated veneer lumber is 50% higher than the cost of building a dry profiled bar. Again, the use of dry details of a guarantee of high bearing capacity of the structure. The low percentage of humidity is a guarantee slight shrinkage of the house, and the quality of timber processing and absence of cracks affect the aesthetic characteristics of future housing. The basic operational and aesthetic characteristics of laminated veneer lumber is given by parameters as the number of splices in length, the adhesive composition, quality and number of lamellas (sawn vertically arranged parts of the trunk), hygroscopicity (the presence of excess moisture in the wood). Wood, humidity less than 18%, if not treated in a special way, is beginning to gain moisture from the environment, dry shaped beam on the gathering and does not give moisture, thus providing less time "getting used to the conditions environment. Experts recommend using laminated board, the joint maximum of two or three lamellae. Technologically easier to produce, dry and glue the thin slats, rather than fat, so domestic companies mostly produce them out of thin material, and he is considered low-grade. In addition, the number of splices is not regulated.

For this reason, very often the house, built from laminated veneer lumber Russian production, it looks spotty, since the paint softwood has sharp transitions from light yellow to orange and vice versa, and bonding and splicing of a large number of parts in one log (more than three up to six) makes a colorful timber. It should be noted that the bonding can be done on the basis of three kinds of adhesives: pu (polyurethane), pva (polyvinyl acetate) or muf. We note that our manufacturers are not testing the strength of gluing, guided only by their own attitudes, in contrast to the Finnish manufacturers. Finnish manufacturers use special regulations on which the adhesive strength of the structures determined by strict Standard: Mark J on the standard sfs, the relevant European en 1940 and prEN 385. And another important point – environmental requirements for adhesive joints.

Under the existing classification they fall into dangerous, unfit for residential use (marked as FC2), a potentially dangerous (FC1) and is completely safe (FC0). In adhesives safe class average formaldehyde content should be less than 0.5 mg / liter. According to the method jas maff, considered normal formaldehyde content of substances in the wood no more than (FC0) 0,2-0,3 mg / liter. It is not hard to guess that the better characteristics of the adhesive and it is safer than the higher its price. Using the construction of dry-profiled bar removes a lot of questions and doubts. The composition of the array is homogeneous, there is no need to doubt what's inside. Clay in the production is not used, but it's 100% ecological purity of the finished product. Also, do not need wary of posting elements that often occur with poor laminated veneer lumber. Price of dry profiled bar with all of this is almost 2 times lower than the price laminated veneer lumber. Currently, more and more developers, including professional builders prefer it to this material. "Price – quality is optimal. Home from the dry profiled bar is very modern, they look great, well hold variations in temperature, which is very important for the regions of central Russia.